Ed is a venerable text editor.
If a file argument is given, ed simulates an e command (see below)
on that file: it is read into ed's buffer so that it can be edited.
The options are|
– Suppress the printing of character counts by e, r, and w commands
and of the confirming ! by ! commands.
–o (for output piping) Write all output to the standard error file
except writing by w commands. If no file is given, make /fd/1
the remembered file; see the e command below.
Ed operates on a `buffer', a copy of the file it is editing; changes
made in the buffer have no effect on the file until a w (write)
command is given. The copy of the text being edited resides in
a temporary file called the buffer.
Commands to ed have a simple and regular structure: zero, one,
or two addresses followed by a single character command, possibly
followed by parameters to the command. These addresses specify
one or more lines in the buffer. Missing addresses are supplied
In general, only one command may appear on a line. Certain commands
allow the addition of text to the buffer. While ed is accepting
text, it is said to be in input mode. In this mode, no commands
are recognized; all input is merely collected. Input mode is left
by typing a period . alone at the beginning of a line.
Ed supports the regular expression notation described in regexp(6).
Regular expressions are used in addresses to specify lines and
in one command (see s below) to specify a portion of a line which
is to be replaced. If it is desired to use one of the regular
expression metacharacters as an ordinary character, that
character may be preceded by `\'. This also applies to the character
bounding the regular expression (often /) and to \ itself.
To understand addressing in ed it is necessary to know that at
any time there is a current line. Generally, the current line
is the last line affected by a command; however, the exact effect
on the current line is discussed under the description of each
command. Addresses are constructed as follows.
1. The character ., customarily called `dot', addresses the current
2. The character $ addresses the last line of the buffer.
3. A decimal number n addresses the n–th line of the buffer.
4. 'x addresses the line marked with the name x, which must be
a lower–case letter. Lines are marked with the k command.
5. A regular expression enclosed in slashes ( /) addresses the
line found by searching forward from the current line and stopping
at the first line containing a string that matches the regular
expression. If necessary the search wraps around to the beginning
of the buffer.
6. A regular expression enclosed in queries ? addresses the line
found by searching backward from the current line and stopping
at the first line containing a string that matches the regular
expression. If necessary the search wraps around to the end of
7. An address followed by a plus sign + or a minus sign – followed
by a decimal number specifies that address plus (resp. minus)
the indicated number of lines. The plus sign may be omitted.
8. An address followed by + (or –) followed by a regular expression
enclosed in slashes specifies the first matching line following
(or preceding) that address. The search wraps around if necessary.
The + may be omitted, so 0/x/ addresses the first line in the
buffer with an x. Enclosing the regular expression in
9. If an address begins with + or – the addition or subtraction
is taken with respect to the current line; e.g. –5 is understood
to mean .–5.
? reverses the search direction.|
10. If an address ends with + or –, then 1 is added (resp. subtracted).
As a consequence of this rule and rule 9, the address – refers
to the line before the current line. Moreover, trailing + and
– characters have cumulative effect, so –– refers to the current
line less 2.
11. To maintain compatibility with earlier versions of the editor,
the character ^ in addresses is equivalent to –.
Commands may require zero, one, or two addresses. Commands which
require no addresses regard the presence of an address as an error.
Commands which accept one or two addresses assume default addresses
when insufficient are given. If more addresses are given than
a command requires, the last one or two
(depending on what is accepted) are used.
Addresses are separated from each other typically by a comma ,.
They may also be separated by a semicolon ;. In this case the
current line is set to the previous address before the next address
is interpreted. If no address precedes a comma or semicolon, line
1 is assumed; if no address follows, the last line of the
buffer is assumed. The second address of any two–address sequence
must correspond to a line following the line corresponding to
the first address.
In the following list of ed commands, the default addresses are
shown in parentheses. The parentheses are not part of the address,
but are used to show that the given addresses are the default.
`Dot' means the current line.
. Read the given text and append it after the addressed line. Dot
is left on the last line input, if there were any, otherwise at
the addressed line. Address 0 is legal for this command; text
is placed at the beginning of the buffer.
Browse. Print a `page', normally 20 lines. The optional + (default)
or – specifies whether the next or previous page is to be printed.
The optional pagesize is the number of lines in a page. The optional
p, n, or l causes printing in the specified format, initially
p. Pagesize and format are remembered between b
commands. Dot is left at the last line displayed.|
. Change. Delete the addressed lines, then accept input text to
replace these lines. Dot is left at the last line input; if there
were none, it is left at the line preceding the deleted lines.
Delete the addressed lines from the buffer. Dot is set to the
line following the last line deleted, or to the last line of the
buffer if the deleted lines had no successor.|
Edit. Delete the entire contents of the buffer; then read the
named file into the buffer. Dot is set to the last line of the
buffer. The number of characters read is typed. The file name
is remembered for possible use in later e, r, or w commands. If
filename is missing, the remembered name is used.
Unconditional e; see `q' below.|
(1,$)g/regular expression/command list
Print the currently remembered file name. If filename is given,
the currently remembered file name is first changed to filename.|
Global. First mark every line which matches the given regularexpression.
Then for every such line, execute the command list with dot initially
set to that line. A single command or the first of multiple commands
appears on the same line with the global command. All lines of
a multi–line list except the last line
must end with \. The `.' terminating input mode for an a, i, c
command may be omitted if it would be on the last line of the
command list. The commands g and v are not permitted in the command
list. Any character other than space or newline may be used instead
of / to delimit the regular expression.
The second and third forms mean g/regular expression/p.|
. Insert the given text before the addressed line. Dot is left
at the last line input, or, if there were none, at the line before
the addressed line. This command differs from the a command only
in the placement of the text.
(.)kxMark the addressed line with name x, which must be a lower–case
letter. The address form 'x then addresses this line.
Join the addressed lines into a single line; intermediate newlines
are deleted. Dot is left at the resulting line.|
List. Print the addressed lines in an unambiguous way: a tab is
printed as \t, a backspace as \b, backslashes as \\, and non–printing
characters as a backslash, an x, and four hexadecimal digits.
Long lines are folded, with the second and subsequent sub–lines
indented one tab stop. If the last character in
the line is a blank, it is followed by \n. An l may be appended,
like p, to any non–I/O command.|
Move. Reposition the addressed lines after the line addressed
by a. Dot is left at the last moved line.|
Number. Perform p, prefixing each line with its line number and
a tab. An n may be appended, like p, to any non–I/O command.|
Print the addressed lines. Dot is left at the last line printed.
A p appended to any non–I/O command causes the then current line
to be printed after the command is executed.|
q Quit the editor. No automatic write of a file is done. A q or
e command is considered to be in error if the buffer has been
modified since the last w, q, or e command.
This command is a synonym for p.|
Q Quit unconditionally.
Read in the given file after the addressed line. If no filename
is given, the remembered file name is used. The file name is remembered
if there were no remembered file name already. If the read is
successful, the number of characters read is printed. Dot is left
at the last line read from the file.
Substitute. Search each addressed line for an occurrence of the
specified regular expression. On each line in which n matches
are found (n defaults to 1 if missing), the nth matched string
is replaced by the replacement specified. If the global replacement
indicator g appears after the command, all subsequent
matches on the line are also replaced. It is an error for the
substitution to fail on all addressed lines. Any character other
than space or newline may be used instead of / to delimit the
regular expression and the replacement. Dot is left at the last
line substituted. The third form means
sn/regular expression/replacement/p. The second / may be omitted
if the replacement is empty.|
An ampersand & appearing in the replacement is replaced by the
string matching the regular expression. The characters \n, where
n is a digit, are replaced by the text matched by the n–th regular
subexpression enclosed between ( and ). When nested parenthesized
subexpressions are present, n is
determined by counting occurrences of ( starting from the left.
A literal &, /, \ or newline may be included in a replacement by
prefixing it with \.
Transfer. Copy the addressed lines after the line addressed by
a. Dot is left at the last line of the copy.|
(1,$)v/regular expression/command list
Undo. Restore the preceding contents of the first addressed line
(sic), which must be the last line in which a substitution was
made (double sic).|
This command is the same as the global command g except that the
command list is executed with dot initially set to every line
except those matching the regular expression.|
Write the addressed lines to the given file. If the file does
not exist, it is created with mode 666 (readable and writable
by everyone). If no filename is given, the remembered file name,
if any, is used. The file name is remembered if there were no
remembered file name already. Dot is unchanged. If the write is
successful, the number of characters written is printed.|
($)= Print the line number of the addressed line. Dot is unchanged.
Perform w, but append to, instead of overwriting, any existing
Send the remainder of the line after the ! to rc(1) to be interpreted
as a command. Dot is unchanged.|
If an interrupt signal (DEL) is sent, ed prints a ? and returns
to its command level.
When reading a file, ed discards NUL characters and all characters
after the last newline.
An address without a command is taken as a p command. A terminal
/ may be omitted from the address. A blank line alone is equivalent
to .+1p; it is useful for stepping through text.